Introducing the Vertere Imperium Motor Drive
We are delighted to introduce to you Imperium Precision Motor Drive. Imperium's design derives from Vertere's RG-1 Reference Motor Drive: it includes a simplified power supply and control functions. As a result, it sits between our Reference Motor Drive and Tempo Motor Drive. The Imperium enhances the musical performance and makes the experience of listening to vinyl on the RG-1 or the SG-1 record players closer to the original master.
What makes Imperium special?
The key was to make a motor drive with as pure a sine and cosine wave output and as little noise as possible. The design and cabling also had to consider possible RF pickup and ingress.
Enclosed in a precision CNC milled from solid aluminium shell lies a twin-regulated linear power supply feeding the primary circuit, the 12V external supply for the record player's illumination and the digital regulation for the microprocessor and DAC.
The double screened programmable and updateable microprocessor digitally generates the sine and cosine waves (which are switchable to be ± 0, 0.25%, 0.5%) to the equally double screened DAC. The output of the DAC feeds two 'power amps' provided by an extremely clean supply to drive the approximately 17V the motor requires.
Exceptional attention to detail, including a gold-plated two-layer PCB utilising extensive ground planes, fully regulated voltage rails powering different circuit sections, and carefully selected components, ensure in-control and 'clean' final delivery of power to the motor. The PCB mixes SMD and thru-hole components using the best of both technologies. Copper foil shields the entire digital, microprocessor and DAC circuitry is first, and then the whole PCB is secondarily shielded using a stainless-steel shield plate.
The motor drive output is a high-quality gold plated 7-way thread-locked DIN connector, connecting Imperium power to the record player via a dedicated motor link cable.
Some background
Contrary to quickly thought logic, the only energy that produces output from a phono cartridge comes from the record player's motor. The quality of this motor, the motor mounting, the drive belt and especially the motor drive, including its power supply, massively influences the player's sound quality.
It seems illogical for the power supply to affect the sound quality dramatically when all it does is provide a constant supply to a digital synthesiser of sine and cosine waves. But equally, we forget that no power supply is perfect, and all have an output impedance and contain some noise and distortion.
Imperium is designed with the optimum linear power supply internally to reduce any external noise pickup and lower the impedance path.
The result is a subtle but, at the same time obvious, improvement of timbre and low-level information and stereo precision, even over Tempo which itself was a significant improvement over the original SG motor drive.
Imperium is supplied fully optimised and set up for the record player motor. In the case of an upgrade, the retailer can adjust the output voltage and phase for absolutely the lowest motor noise and vibration. This is adjustable for both 33.3 and 45rpm rotational speeds.
One, sometimes forgotten, element of record player design is the future technology of the belt. Should a new material be researched that delivers improved performance but requires a different thickness of the belt, this would change the platter's speed as speed is related to the circumference drawn by the centre of the width of the belt – Not the inner circumference as would be expected. In this case, Imperium (in fact, all Vertere digital motor drives) could be reprogrammed to deliver precisely the correct speed and pitch.
Tempo has a recommended retail price of £7950.00, 9998€, $11995 and is available to order now from your local Vertere retailer. The Imperium packaging includes a motor link and a 2m Redline mains cable.