veRum Solo
veRum Solo Tonearm and Interconnect Cable
The new veRum Solo reference-standard Analogue Tonearm and Interconnect Cable offers superlative performance and is closest in design and sonic attainment to Vertere’s benchmark Pulse-HB.
Manufactured on precision machines with the most delicate tolerance cable manufacturing machinery in Europe. veRum brings a large proportion of the reference Pulse HB's neutrality, dynamics and even-handed performance without the high costs involved in being hugely labour intensive and using wire so delicate that four together are thinner than a human hair.
veRum Solo includes two VeRum cables and a separate Special Ground/Power Conductor set. The extra set includes two tinned high-purity copper conductors with a PVC dielectric, shielded by a special foil and tinned copper braid, all enclosed in a PVC outer. Surrounding all three PVC enclosed wires is a cotton filler for damping and a final PVC outer jacket for protection.
Each veRum cable (one channel) includes:
Two signal and two return Pulse Hairline silver-plated high-purity copper multi-stranded wires with an FEP dielectric
One signal and one return Microline silver-plated high-purity copper multi-stranded wires insulated with an FEP dielectric
One signal and one return Modeline silver-plated high-purity copper multi-stranded wires with an FEP dielectric
veRum Analogue Interconnect Cable
Developed from Vertere’s benchmark Pulse-HB cable, veRum Analogue Interconnect Cable is internally configured and optimised for unrestricted dynamics while preserving the intricate low level detail. Constant source noise floor of line level signal, or varying noise floor of pre out, is kept to a minimum resulting in an unequivocally musical experience. It’s ideal for use in both Line Level and Pre Out applications.
veRum Analogue Tonearm Cable
Like the absolute reference Pulse-HB, veRum Analogue Tonearm Cable is internally configured to suit the miniature cartridge generator. This construction conducts the delicate phono signal as well as accommodating the substantial RIAA equalisation on the LP. The low frequencies, recorded at much attenuated levels, are conducted just as effectively as the higher level high frequencies.
Technical Specifications
veRum Solo Interconnect Cable
Stereo Interconnect Cable
(2x Interconnects, 1x Ground/Power & Outer Covering)
Termination and Length
RCA, XLR 1.15m (Additional lengths in 0.5m steps)
Cable Type (Each Interconnect)
x9 Conductors, Vertere Pulse Multi Type
x1 Ground, x4 Signal (Hot), x4 Signal (Return)
Ground/Power
x2 Conductors & Braid
Outer
Filler & Braid
Conductor
High Purity Copper
Plating
Silver, Tin
Insulation
FEP, PVC
Shield
Main Braid + Special foil Inner Wrap – on all four cables
Connector
Vertere veRum RCA & XLR – Gold Plated contacts
x2 Splitters with 210mm free cable – on both ends
4.7mm Dia. – interconnect
Size
4.7mm Dia. – interconnects
3.0mm Dia. – Ground/Power
12.0mm Dia. – Outer
18.0mm Dia. – Splitter
veRum Solo Tonearm Cable
Type
Tonearm Cable (2x Interconnects, 1x Ground/Power & Outer Covering)
Termination and Length
Tonearm DIN to RCA, XLR 1.15m (Additional lengths in 0.5m steps)
Cable Type (Each Interconnect)
x9 Conductors, Vertere Pulse Multi Type
x1 Ground, x4 Signal (Hot), x4 Signal (Return)
x2 Conductors & Braid
Ground/Power
x2 Conductors & Braid
Outer
Filler & Braid
Conductor
High Purity Copper
Plating
Silver, Tin
Insulation
FEP, PVC
Shield
Main Braid + Special foil Inner Wrap – on all four cables
Connector
Vertere Tonearm DIN, veRum RCA & XLR – Gold Plated contacts
x2 Splitters with 210mm free cable – on Amplifier side
Size
4.7mm Dia. – interconnects
3.0mm Dia. – Ground/Power
12.0mm Dia. – Outer
18.0mm Dia. – Splitter
